Life at the end of the road

March 2, 2019

Spring hey :-)

Can’t say as it feels much like spring today right enough but yesterday, the first day of it, was a cracker despite the forecast. XC said it was gonna be OK in the morning but gradually deteriorating in the afternoon with rain arriving and staying by 20:00. As it turned out, it was a great day and the rain arrived at 19:50 Smile Not only was it a good day but it was manic even by the yardstick of when I was in my thirties and not sixties. By my standards of the last ten years it was probably record breaking Smile 

DSCN2362

First off I managed to finish the gable end of ‘Callum’s shed’ and get the flashing on the roof. Then I wasted the best part of half an hour trying to get the Subaru onto the vehicle lift. I was pretty sure it wouldn’t cos me workshop was full of quads, a lighting tower and of course the Range Rover. However, having purchased a 2T single post vehicle lift last year for the sole purpose of stopping me crawling under jacked up cars I was gonna have a darn good try.

DSCN2363

I even went as far as jacking up the Subaru to try and move it onto the lift before giving up. I could have done it right enough by moving the lift sideways with tyre levers or something but ‘time was marching on’, it was 10:00am and I had to be down at the ferry terminal for around 11:00. Common sense got the better of me and I did what I should have done in the first place and just jacked her up at the front and placed axle stands under her. All I wanted to do was look at the CV joint and possibly order one up before the weekend.

DSCN2365 DSCN2366 DSCN2367

The CV joint boot had come off so I planned to clean it up, repack the joint with graphite grease and replace it with a new clip. However, as I rotated the wheel on ‘full lock’ so as to clean the joint I saw the ball cage was broken Sad smile Ah well ‘that’ll be that then’ and straight on the phone to buy another. Just as well really cos I had to get me finger out, gather me diving gear and go ‘see a man about a dog’ Smile

DSCN2368

OK, go and look for some lost moorings and check one for a Mate. Not that I’d been asked to do either of these tasks, just that I offered the next time I was in the area looking for dinner Smile Said lost mooring were close by where the MV Speedwell’s mooring was so we tied up to that and I went ‘a hunting’

DSCN2369

and landed right on top of a good sized scallop. It’s not until I see this picture that I realize how hard they are to spot to the ‘untrained eye’. It’s no wonder that when I do dive with other people that don’t fish scallops for a living, they swim over loads and miss them.

DSCN2370 DSCN2371 DSCN2372

Whilst I was using the mooring as a reference spot I did the decent thing and checked it, all the anchors were ‘dug in’ and shackles well wired so Speedwell would be quite safe.

DSCN2373 DSCN2374

After a short swim I found the two missing risers, both of which had come undone at the surface, with one of them still having the pin in it!

DSCN2375

Then it was back to the surface a full 4m above me to collect two marker buoys to attach to the riser chains, that could be done by my companion in the RIB at his leisure on the surface. Me, I had a shed and car to fix Smile

 DSCN2377 DSCN2378

The MV Loch Bhrusda arrived on Thursday afternoon and had picked up the service from Hallaig on Friday morning. Hallaig having departed for Lochaline at first light or there about.

DSCN2379 DSCN2380

Speedwell finally fishing and loaded with crab gear.

Feeling pretty chuffed with the morning’s effort I headed home for a rather unusual lunch. ‘The’ scallop fried with bacon, harissa and kidney beans, awesome, I kid you not Smile

DSCN2381

Not ‘in the plan’ Smile

After lunch it was back to the shed and the guttering,

DSCN2382

using my diving reel as a marker for the gutter brackets which need mounted with a slight fall in them so the water does not collect. Once I’d got the line really taught between two screws, (one at each end) I put in screws at each spot I’d be fitting a bracket.

Just as I was getting nicely ‘stuck in’ to this job my neighbour turned up with a wind turbine problem Sad smile Their Proven 2.5kW turbine had broken a spring!!! She was just after advice how to brake it but I reckoned we needed to sort it ASAP. The weather was going to break that night and the dry spell would come to a spectacular end. Better to get it lowered and fixed right away and back up in the air working during the gales rather than lying on the ground and using the Lister generator.

Proven/Kingspan spring repair

DSCN2383

I installed this WT2500 Proven in 2005 so it’s done 14 years service with just routine maintenance and a few springs, luckily I have plenty of spares Smile After taking the Tirfor and tools up there on the quad

DSCN2384 DSCN2387

we set up the ‘gin pole’ and lowered to a working height using an oil drum and wooden block as a support.

DSCN2385 DSCN2386

I then replaced the broken spring with one from my ‘stock’ using an old bolt to slide through the many bushes and washers as I drew the retaining bolt out. This greatly speeds up the task and ensures you do not loose anything. To be honest I should have removed all three spring sets, inspected all the bushes and washers and replaced as required but it was early evening and the weather was set to get wet and windy. I figured the sane thing to do was to get it back together and back up ASAP.

Sure enough, by 18:30 she was back up and generating, I called it a day, had a good hot shower and ‘binge watched’ three hours of Shetland https://en.wikipedia.org/wiki/Shetland_(TV_series) . I love the islands having spent time diving there in the eighties and wifey went to the same school as Douglas Henshall Smile Not that those are particularly good reasons to watch anything but I enjoy it anyway Smile

Saturday

I gotta say I was severely surprised when I let the dugs out this morning and it was dry outside!!! sure it was windy but at least I could get on with the guttering on ‘Callum’s shed’, which is exactly what I did.

DSCN2389 DSCN2390

I got all my ‘stand offs’ on, nicely lined up and screwed in just before the rain started, getting only slightly wet as I fitted the drain pipe. And that was despite a visit by the Jehovah’s Witnesses, whom I invited in for tea on the condition they didn’t try and convert me Smile Seriously, Arnish would not be the same without the occasional Watchtower through the letterbox Smile I don’t have much time for the Abrahamic religions   https://en.wikipedia.org/wiki/Abrahamic_religions who basically all think that their way of worshipping the same God is the right one and to Hell with everyone else. However I do admire these folk, who ‘come rain or shine’ visit this bastion of Presbyterianism with a smile on their face and not the slightest hint of ‘fire and brimstone’ knowing full well they’ll have little or no sympathy Smile As my own ‘Prophet’ of choice, Khalil Gibran https://en.wikipedia.org/wiki/Kahlil_Gibran said “Faith is an oasis in the heart which will never be reached by the caravan of thinking” Smile

DSCN2391

Before long it was pure pishing down with a howling gale as accompaniment, perfect weather for testing out the shed and I was well impressed. The gaps in the boards break up the wind but allow it to pass through keeping the shed well aired but not too draughty even in the gale. It is perfectly dry apart from the floor but even that could be sorted if I wanted as the slab is on a slope. So, if I did something at the eastern end like a gutter at the base of the boards or a ridge in the floor to shed the water to the edge, then I could keep the floor dry. To be  honest though I don’t see this as a problem, it’s prime function is to keep the Searider in and hang diving gear and washing to dry. Such was the rain that the frogspawn I’d spotted yesterday,

DSCN2392

had been washed 25m from behind the barn to under the large wind turbine.

Even in the ‘teeth of a gale’ with all the rain it was still possible to get the neighbours tank half in and crawl underneath to work on the transmission brake and anti-roll bar.

 DSCN2393 DSCN2398

8 Comments »

  1. Paul,

    The weather sure has turned a corner and is a bit blustery to say the least.
    Calum’s Shed is looking great, I take it all of that wood is Larch from the Raasay sawmill?
    We had an excellent visit the other week, finally getting up Calum’s Road, that is nothing short of an amazing achievement by one man. That was after visiting the distillery, looking forward to returning and staying for a night or two.
    All the best,
    Michael

    Comment by Arthur T Bomber Harris — March 3, 2019 @ 7:34 am

    • Aye Michael,
      blustery to say the least but at least it’s stopped raining and the sun is making the occasional appearance. All locally grown timber cut by Callum at the Raasay Sawmill. Did you pay Callum a visit? He said he’d met a ‘blog tourist’ 🙂

      Comment by lifeattheendoftheroad — March 3, 2019 @ 9:34 am

      • Hi Paul. Blog tourist? oh dear that sounds a bit derogatory. I hope vast majoroity of your followers do so for genuine, good reasons, following someone and something they are genuinely interested in and, yes, care about. If I’m ever lucky enough to make it back and came across you I would stop by to say hello and show my appreciation. There again, was Calum joking? Sally

        Comment by Sally — March 3, 2019 @ 11:11 am

      • Paul,
        I did speak with Callum as I will need some Larch cladding for a Shed in the next year and it would be great to get some quality Larch locally rather than some far away sawmill. I’m no tree hugger but if someone local is producing a quality product I would aim to support them. I did mention to him that I came across his existence via your blog.
        I thought my visit to the end of the road more of a pilgrimage, as folks undertake to The river Ganges, Mecca or Lourdes.
        Maybe if blog tourism took off you would find yourself selling, ‘I made it to the end of the road’ or ‘I met Paul at the end of the road, have you?’ Bumper stickers. 😉.

        Just realised I missed the previous instalment where you had a few more pictures of the shed.
        Take it easy.

        Michael

        Comment by Michael — March 3, 2019 @ 11:27 am

  2. Hi Paul, in the years i have been following you in never fails to amaze me what you get up to!! a slice of heaven indeed!!

    Comment by v8mbo — March 3, 2019 @ 8:11 am

    • Cheers Robin, but I am slowing down, honest 🙂

      Comment by lifeattheendoftheroad — March 3, 2019 @ 1:15 pm

  3. Hi Paul – This is probably a naive question, but why does Hallaig to to Lochaline? Why not leave Hallaig alone and just send Loch Bhrusda to Loachaline???

    Comment by David — March 4, 2019 @ 8:41 am

    • Not a naive question at all, that would be the sensible, economical and logical thing to do but then I wouldn’t get get my annual holiday in LA 🙂 🙂

      Comment by lifeattheendoftheroad — March 4, 2019 @ 11:12 am


RSS feed for comments on this post. TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Blog at WordPress.com.

%d bloggers like this: